|
|
All the simple conveyor belt range, besides the derived
types(not standard), may become composed conveyor belts when
the accesories hereunder make part of their construction:
Side wings, to prevent the product from falling over the sides of the belt, and its shape and height can vary( types C.A-L, C.A1_L, etc.).
Crosswise strips, to hold the product whenever the belt operates on inclined planes. Angle bars fastened to flatbars by screws or directly welded onto the belt mesh are commonly used. In principle, their height has no limitations ( types C.A-T, C.A1-T, etc.)
The belts can be also manufactured with wings and strips(types CA-L-T,CA1-L-T, etc).
Side chains, to ease belt haulage and ensure proper drive preventing the wire mesh from being subject to the wear and tear resulting from the dynamic motion of the belt. The most standard pitches are used, such as 9.52 mm, 12.70 mm, 15.87 mm, 19.05 mm, 25.40 mm, 38.10 mm and 50.80 mm (types C.A..., C.A1...,etc.).However, the belts can be manufactured at the size our customers may require, by linking the chain to the belt at each pitch or at N pitches. The chain belts can be also manufactured with side wings and crosswise strips(types C.A1..., C.A1...L, C.A...L...T, C.A1...L...T, etc).
(...) Fill in the chain pitch on the belt type suspension points.
Besides these usual accesories, composed conveyor belts can be manufactured equipped with continuous or perforated sheet flatbars inside the spirals. U-shaped strips, high spirals, fork-shaped finished rods, etc. Our Technical Department can study and execute any handling our customers may require, no matter hor complex it may be.
|
 |
